TPU layflat drag hose

TPU layflat drag hose is designed for drag systems. These are used for distribution of slurry and manure as fertilizer in the fields of agriculture. These systems require hoses to be connected between slurry reservoirs (lagoons) and tow tractors in the field to be fertilized. The tow tractor pulls the draghose behind it while the hose feeds the injection tool bar that deposits the manure in the plowed furrows. The distance between the lagoon and the edge of the field is made up of transfer hoses, but the last one or two lengths before the tow tractor are dragged in the field and put under continuous severe tress.

Orient layflat drag hose is designed with this extreme tensile stress and abrasion in mind. The TPU cover has abrasion resistance 4 – 5 times that of commonly used rubber. The tensile strength has been substansially increased to withstand the pull forces. It represents the latest in environmentally friendly and safe manure distribution. Standard lengths up to100 or 200 meters. Longer lengths on request for diameters lower than 6 inches.

Tube:Thermoplastic polyurethane(TPU)
Cover:Thermoplastic polyurethane(TPU)
Reinforcement:High strength circular woven polyester or poiyamide.
Application:Distribution of slurry and manure as fertilizer; Delivery of water
in self-propelled machinesfor irrigation.
Temperature: -50 to +80℃

Layflat Drag HoseAdvantages
Exceptional resistance to oil, fuel and chemicals
No drying required
Long-living
Cold-resistant up to -50°C
Heat-resistant up to +80°C
Increased protection against mechanical damages
Excellent resistance to ageing, weathering, ozone and UV
Easy maintenance and handling
service
Standard colour black, other colours on request
Individual marking available
Binding with international couplings available on request
Other diameters on request
Standard lengths 100m and 200m
Available in lengths up to 500 m depending on diameter